Re: Flock of mules
Posted: Sun Dec 18, 2022 2:26 pm
Haven't tried pops yet, but I'll bookmark it and check them out. Thanks fellas!
Hope to finish the 2nd before returning back to work.
Spyderco Forums
Flock of mules
Page 4 of 8
Re: Flock of mules
Posted: Fri Dec 30, 2022 5:09 pm
Finished up one of 3 mules I started this Christmas vacation. Mulecation as it were.
Hope to finish the 2nd before returning back to work.
Hope to finish the 2nd before returning back to work.
Re: Flock of mules
Posted: Fri Dec 30, 2022 8:03 pm
Nice burl.
Re: Flock of mules
Posted: Sun Jan 01, 2023 4:05 pm
Purple heart handle on M398 Mule.
Re: Flock of mules
Posted: Mon Jan 02, 2023 9:15 am
^that's another good looking mule pacu!
Since I had some leftover zombie Kydex, I did another toxic green g-10/micarta, but this time burlap. I also used cf tubes for pins with the intent to fill the tubes with epoxy and gitd powder. Probably shouldn't have polished it up 1st.
Since I had some leftover zombie Kydex, I did another toxic green g-10/micarta, but this time burlap. I also used cf tubes for pins with the intent to fill the tubes with epoxy and gitd powder. Probably shouldn't have polished it up 1st.
Re: Flock of mules
Posted: Mon Jan 02, 2023 3:15 pm
Killing it latelylegOFwhat? wrote: ↑Fri Dec 30, 2022 5:09 pmFinished up one of 3 mules I started this Christmas vacation. Mulecation as it were.
Hope to finish the 2nd before returning back to work.
Re: Flock of mules
Posted: Sun Jan 08, 2023 8:02 am
Blue jean micarta and the dreaded Kydex scratch 
Re: Flock of mules
Posted: Sun Jan 08, 2023 12:36 pm
Micarta looks great! Scratch as expected for a knife that gets used...badge of honor.
Re: Flock of mules
Posted: Sun Jan 08, 2023 4:41 pm
Man I am going to have to up my game. All these Mules lately. 
Re: Flock of mules
Posted: Sun Jan 08, 2023 7:29 pm
Re: Flock of mules
Posted: Mon Jan 09, 2023 12:54 pm
Looks good! I've always wondered how that material would hold up in use. Is it hard to work with when hand sanding?legOFwhat? wrote: ↑Sun Jan 08, 2023 7:29 pmLet's pick it up Andy! Glued and roughly shaped another last night. ....I've got issues
Re: Flock of mules
Posted: Mon Jan 09, 2023 1:12 pm
Really easy sanding and takes a great polish. The thin metal mesh will polish up right along with it and gives a great contrast and effect on both the sides and the face.Josh Crutchley wrote: ↑Mon Jan 09, 2023 12:54 pmLooks good! I've always wondered how that material would hold up in use. Is it hard to work with when hand sanding?legOFwhat? wrote: ↑Sun Jan 08, 2023 7:29 pmLet's pick it up Andy! Glued and roughly shaped another last night. ....I've got issues
Love Raffir!
Re: Flock of mules
Posted: Thu Jan 12, 2023 7:31 pm
Left wet blue tape on this mule while wet sanding for a few days and picked up a little rust. Sprinkle of BKF and light finger rubbing took it right off. 
Re: Flock of mules
Posted: Thu Jan 12, 2023 10:38 pm
Off Topic
Is it all the Uranium ones that glow ?legOFwhat? wrote: ↑Mon Jan 09, 2023 1:12 pmReally easy sanding and takes a great polish. The thin metal mesh will polish up right along with it and gives a great contrast and effect on both the sides and the face.Josh Crutchley wrote: ↑Mon Jan 09, 2023 12:54 pmLooks good! I've always wondered how that material would hold up in use. Is it hard to work with when hand sanding?legOFwhat? wrote: ↑Sun Jan 08, 2023 7:29 pmLet's pick it up Andy! Glued and roughly shaped another last night. ....I've got issues
Love Raffir!
Have had a look at some lately but shipping is pretty expensive. Flat rate $65 US
Re: Flock of mules
Posted: Fri Jan 13, 2023 7:39 am
Yep, all the Uranium glows. Yikes that's not fair, that's twice what the scales would cost!standy99 wrote: ↑Thu Jan 12, 2023 10:38 pmOff TopicIs it all the Uranium ones that glow ?legOFwhat? wrote: ↑Mon Jan 09, 2023 1:12 pmReally easy sanding and takes a great polish. The thin metal mesh will polish up right along with it and gives a great contrast and effect on both the sides and the face.Josh Crutchley wrote: ↑Mon Jan 09, 2023 12:54 pmLooks good! I've always wondered how that material would hold up in use. Is it hard to work with when hand sanding?legOFwhat? wrote: ↑Sun Jan 08, 2023 7:29 pm
Let's pick it up Andy! Glued and roughly shaped another last night. ....I've got issues
Love Raffir!
Have had a look at some lately but shipping is pretty expensive. Flat rate $65 US
Re: Flock of mules
Posted: Fri Jan 20, 2023 9:28 pm
Made a few changes on this ZWear mule. Changed the lower portion to a chamfer instead of radius. My 1st gitd/epoxy fill on the cf tubes worked out pretty well but I made a mess and learned what not to do. 
Hopefully the T15 Mule drops soon but, in the meantime I intend revisit a few previous mules just make some changes.
Hopefully the T15 Mule drops soon but, in the meantime I intend revisit a few previous mules just make some changes.
Re: Flock of mules
Posted: Sat Jan 21, 2023 2:24 am
Hey I shapped my Ultem Magnacut one today and made a set of scales for another… got another 2 days off so give me a few days.
(The Ultem is a sanding nightmare from now on as it’s all hand sanding through the grits)
(The Ultem is a sanding nightmare from now on as it’s all hand sanding through the grits)
Re: Flock of mules
Posted: Sat Jan 21, 2023 10:29 am
Those are going to look great Andy! I dig amber!
Re: Flock of mules
Posted: Mon Jan 30, 2023 6:14 pm
Prepping for Tee15! Well just squaring things up
Re: Flock of mules
Posted: Tue Jan 31, 2023 9:38 am
Favorite thread. Really nice work team!