Byrd Crossbill Help
Byrd Crossbill Help
This might be my last Byrd that I ever buy.... to many other manufactures without issues or factory defects like this.
I just received a new Crossbill and the amount of effort to open this knife is damned ridiculous. VERY STIFF! I am beyond dissatisfied.
I see no way to open this knife as it is the Stainless Steel version.
I was told that there is no pivot screw inside and that it is pinned (?)
Anyone out there have suggestions ?
I just received a new Crossbill and the amount of effort to open this knife is damned ridiculous. VERY STIFF! I am beyond dissatisfied.
I see no way to open this knife as it is the Stainless Steel version.
I was told that there is no pivot screw inside and that it is pinned (?)
Anyone out there have suggestions ?
Zeroed4x W4WTA
-
- Member
- Posts: 6909
- Joined: Sun Apr 09, 2006 2:16 pm
- Location: Liberal, Kansas
Yes. If you're unhappy with your purchase, contact the seller. If the seller won't help, contact Spyderco Warranty and Repair. They'll probably tell you to send it in so they can see it, and either repair or replace it. Or you can void the warranty and possibly destroy the knife working on it yourself. They aren't that hard to fix, but there is some risk involved. For the record, I've never heard of a manufacturer that has never shipped a defective product. Even Victorinox has had a few issues.
I don't believe in safe queens, only in pre-need replacements.
-
- Member
- Posts: 275
- Joined: Mon Mar 05, 2012 1:39 pm
- Location: Austria
I had a very stiff Pelican (hard to open with 2 hands) wich works just fine now, the blade swings free when the lock bar is pressed.
All I did was to open and close it over and over (several hundred times, took more than a week playing with that knife every second of free time). There was a little dent in the liner right at the pivot, I could see it-and I worked it away. Of course stainless steel handled knives are not as adjustable as screw versions but Crossbill and Pelican convinced me they are absolutely useful as feeling just like a single piece of metal when open!
Good luck with your Crossbill whatever you do with it. To contact the seller would also be a good idea if you don´t want to take the risk of failing to break it in.
Btw: after handling the Pelican that intensively we got really close, now it is my #1 work knife when things get rough.
All I did was to open and close it over and over (several hundred times, took more than a week playing with that knife every second of free time). There was a little dent in the liner right at the pivot, I could see it-and I worked it away. Of course stainless steel handled knives are not as adjustable as screw versions but Crossbill and Pelican convinced me they are absolutely useful as feeling just like a single piece of metal when open!
Good luck with your Crossbill whatever you do with it. To contact the seller would also be a good idea if you don´t want to take the risk of failing to break it in.
Btw: after handling the Pelican that intensively we got really close, now it is my #1 work knife when things get rough.
Did you buy it new, if so call\email\return to that store or contact Spyderco about it
as Yablawnoski noted. Some have had new knives that were gritty as Blerv said, and
they can be washed in soapy water, dried and oiled and worked open and close as
Commendatore replied. Now that I think about it, there wasn't any need for me to
say anything.
as Yablawnoski noted. Some have had new knives that were gritty as Blerv said, and
they can be washed in soapy water, dried and oiled and worked open and close as
Commendatore replied. Now that I think about it, there wasn't any need for me to
say anything.
- Half Sack
- Member
- Posts: 260
- Joined: Sat Apr 30, 2011 12:55 am
- Location: Alberta, undisclosed location of the Weapon Plus Program
Do what everyone else said, especially Commendator. My Endura was very tight when I first got it. While watching tv I would open and close the knife repeatedly eventually it got to where it is now and feels great. No oil or adjustments needed.
Failing that get in touch with the seller or warranty repairs. Until you know the issue try not to write off the Byrd's I only have one but I have many more on my list.
Failing that get in touch with the seller or warranty repairs. Until you know the issue try not to write off the Byrd's I only have one but I have many more on my list.
Welcome to our newest member, Half Sack
:spyder: Endura4 wave, Ladybug Hawkbill H1, Byrd Hawkbill, PM2 digi camo, Sharpmaker *Sprints: Dodo Orange, MeerKat Burgundy, "R" Nishijin *Discontinued: Caspian H1 :spyder: #ByrdWeek Winner :cool:
No one likes the dark - Robin Sherbatsky
*Signature not updated, purchases missing...*
:spyder: Endura4 wave, Ladybug Hawkbill H1, Byrd Hawkbill, PM2 digi camo, Sharpmaker *Sprints: Dodo Orange, MeerKat Burgundy, "R" Nishijin *Discontinued: Caspian H1 :spyder: #ByrdWeek Winner :cool:
No one likes the dark - Robin Sherbatsky
*Signature not updated, purchases missing...*
- defenestrate
- Member
- Posts: 2656
- Joined: Fri Sep 24, 2004 10:33 am
- Location: RTP NC area
- Contact:
What Commendatore said.
I have gotten used spydies and started playing with them as I often do with new blades, just flicking them open and shut in my spare time, and all have loosened up a bit. The SS models can sometimes be a bit stiffer in my experience but they too will loosen up with time as the mating surfaces between tang and bushings or frame or lock wear the tiny uneven spots smooth. I would just keep playing with the knife and not decide to send it back into :spyder: until I had opened and shut probably 1000+ times.
If you really don't like it, you can send it to me. I still want a crossbill
I have gotten used spydies and started playing with them as I often do with new blades, just flicking them open and shut in my spare time, and all have loosened up a bit. The SS models can sometimes be a bit stiffer in my experience but they too will loosen up with time as the mating surfaces between tang and bushings or frame or lock wear the tiny uneven spots smooth. I would just keep playing with the knife and not decide to send it back into :spyder: until I had opened and shut probably 1000+ times.
If you really don't like it, you can send it to me. I still want a crossbill
-
Happy, Happy, Happy! Peel, Peel, Peel!
Happy, Happy, Happy! Peel, Peel, Peel!
-
- Member
- Posts: 82
- Joined: Sun Mar 17, 2013 10:17 am
Thanks for all the comments, I have quite a bit of previous experience with tight spydercos and I've always been able to resolve stiff deployment issues.
I decided to return it and never look at another Byrd unless it has screws and I can get to the inside of the SOB. I will admit, its a huge disappointment and quite frankly had me pissed off beyond comprehension. I was defeated by a $26 POS but, lesson learned. Thanks
I decided to return it and never look at another Byrd unless it has screws and I can get to the inside of the SOB. I will admit, its a huge disappointment and quite frankly had me pissed off beyond comprehension. I was defeated by a $26 POS but, lesson learned. Thanks
Zeroed4x W4WTA
- araneae
- Member
- Posts: 5492
- Joined: Wed Aug 09, 2006 10:10 pm
- Location: A lil more south of the Erie shore, Ohio
Sorry to hear you took the whole situation so hard. I can assure you that this is not the norm with any of my Byrds. When you get this frustrated about a knife, you may want to think about the things in life that are truly worth getting frustrated about like world hunger, families with no health care, the growing gap between the rich and the poor......zeroed4x wrote:Thanks for all the comments, I have quite a bit of previous experience with tight spydercos and I've always been able to resolve stiff deployment issues.
I decided to return it and never look at another Byrd unless it has screws and I can get to the inside of the SOB. I will admit, its a huge disappointment and quite frankly had me pissed off beyond comprehension. I was defeated by a $26 POS but, lesson learned. Thanks
So many knives, so few pockets... :)
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
-Nick
Last in: N5 Magnacut
The "Spirit" of the design does not come through unless used. -Sal
- DJFrostbyte
- Member
- Posts: 136
- Joined: Wed May 29, 2013 7:56 am
- Location: Houston Texas
Agreed... I can't imagine getting that upset over a <$30 knife. If it was a $400 sebenza, I could see getting upset. But lets get things into perspective.araneae wrote:Sorry to hear you took the whole situation so hard. I can assure you that this is not the norm with any of my Byrds. When you get this frustrated about a knife, you may want to think about the things in life that are truly worth getting frustrated about like world hunger, families with no health care, the growing gap between the rich and the poor......
Endura 4 FFG - Delica 4 FFG - Sage 3 - Dragonfly Salt - Forum Native - Manix 2 LW - Manix 2 G10 - Tenacious - Persistence - Ambitious - Byrd Meadowlark G10 - Cat - C13 Pro Grip - Delica C11PBK - Atlantic Salt - Navigator - Para 2 Camo - Delica C11PBLE - White Endura Sprint - Mule MT05P - Delica 4 FFG - Salsa - Native 5 Ti - UKPK - Sage 1 - Dragonfly G10
- ginsuwarrior
- Member
- Posts: 199
- Joined: Wed Jun 05, 2013 8:59 pm
- Location: Virginia Mountains
zeroed4x wrote:I will admit, its a huge disappointment and quite frankly had me pissed off beyond comprehension.
I used to live near this part of South Florida, you would be amazed at how quick people get upset about trivial things. Quick tempers and short attention spans, and lots of air conditioning.you may want to think about the things in life that are truly worth getting frustrated about