Spyderco Forums

Blurple S110V Millie vs Carbon/S90V Chief.

Forget that it’s me trying to decide. Which option do YOU like better?

As always, thank you for your input!

Hello everybody...
It's a long time I was not on that place, but even if I was not logged since October 2016 still I was looking time to time at spyderco new models and new releases.

I'm here because after so many years I had to buy a new piece....

Today for me it the G-10 Cat!! John

If this is a duplicate thread.. Please delete..

Hey y'all,

I couldn't let the news of a hollow-ground maybe-K390 delica go by uncelebrated. This is now easily my most anticipated knife. Like many of you, over the course of my knife collecting journey, my tastes have evolved towards pure function....

This thread is meant to be connected to peoples email alerts, so please don't make excessive comments, only post links and leads on drops of the 15V Shaman Sprint.

If you want to comment please comment in the companion thread:
15V Shaman!

Good...

Any chance at a run of Ronin 1 fixed blades?

The Ronin 1 was small, light, and carried easily. It also cut well and was great for EDC tasks.

Please let me know if it's possible to look at the link above and not want one.

I see and hear a lot of people fully sharpening their knives in time frames that seem pretty quick to me…like they do it pretty often… like once a week or month? It seems like many users sharpen their blade wayyy more often then I do, and I use my knives...

For many years I only had eyes for the leaf one but that funky drop point blade started to grow on me. It screams “spyderco” and it really is a good performer. The Heinnie red exclusive drop point sealed the deal for me. I love that thing. I only wish...

Can anyone tell me if this is an early April Fools???!

Does anyone know what steel the back lock and spring are made of on the new Native 5 Salt MagnaCut? I assume it’s just stainless but am wondering if they were also made from the same steel.

I’ve been noticing a phenomenon for the last few years…some steels keep their front end sharpness over time without any use and others seem to very subtly dull, even without use. I’m not sure what makes this happen…it seems to be a subcategory or edge...

Recently I launched a thread asking you folks which 3 of the older models you all would like to see in a Sprint Run. The one model that just kept coming up over and over again was the C-60 Ayoob model. It just makes perfect sense to take a hard look at a...

I'm a Canadian Armed Forces helicopter pilot and was recently in Denver for training. I had the pleasure to stop by the factory store in Golden and snagged myself an amazing Stretch XL CruWear which I absolutely love.

What I would like to highlight is...

Like, I get it, there's really great enthusiasm for this really great new steel.

If we look at it from a numbers-only point of view ( source ) we can see that the steel offers *amazing* corrosion resistance with *good* toughness, and *average* edge...

I was just sat in my office cooling off from some landscaping work, enjoying a frosty Coke Zero and idly cleaning my Cruwear Manix 2 XL when it occurred to me that the handle and CBBL locking mechanism would really lend themselves to a big Bowie blade...

Hey guys! This is my first post here and I'm looking to get my first Spyderco. Preferably a one and done option for now before I inevitably catch the bug and spiral into a collection, as I can tell already it's not hard to fall into lol! I'm getting...

15V Shaman!

THIS IS THE COMMENT THREAD! LEAVE YOUR COMMENTS HERE!

POST ALERTS AND LEADS IN THIS THREAD:

Ok, so what do y’all think of an A) chisel grind option and B) of it favouring right handed bias, meaning the bevels would be on the “show” side (thanks The Internet for creating a “show side” 🙄 )

I have lurked here for years. I have learned a great deal from this forum & memebers here.

I often wonder how an alien from some far away planet would look at my thoughts & the discussion here ?

Which brings me to the Zoomer. This knife to...

The May 2022 issue of Spyderco Byte includes upgrade of H-1 to H-2 stainless steel.

Due to dynamic changes in the Japanese steel industry, H-1 will no longer be produced. Current inventory of the steel is being rapidly exhausted, as are current...

Time for another round of Spyderco's BBB 15v! :party-face

This is the thread for In Stock alert posts.
I would never tell anybody what to do but, maybe we can keep other comments and discussion in the CPM 15V PM2 thread here...
I personally don't...

Hello everyone,

Steve here. I have been reading this forum for many years and have been using and buying blades for over 15. I must say this is a great forum. I have learned so much about knives on this forum over the years and still have a lot more to...

Howdy,
I have a S90V sprint run Native Chief. Does anyone make a set of titanium scales for it yet?
Thanks!

Wow, what a knife. I'll be honest I wasn't blown away by pictures, but I just got to handle one the other day and man was I impressed, like Military competition impressed. Like might be my favorite choiled design impressed.

But......

Lets just start a thread to talk about it.

Questions.
1. Is this the BBB colab, or does it just have his mark and heat treat?
2. Will mere mortals be able to sharpen it?

I dont love brown, but brown also doesnt look bad most of the time.

Price...

this looks like it could be a really great edc fixed blade. i'm curious about the plunge grind and the really narrow portion where the handle meets the blade, but i'll probably still try it out. i like this blade shape a lot and my experience with...

I feel the Watu needs it’s own thread!

I’m so pumped for this one. I wish it wasn’t laminate cf, but the 20cv is a bonus!

What do y’all think?

I give you ... the Spyderco Salt2 in plain edge. This baby displaced most of my plain edge Delicas and I tell you why. That hollow ground H1 blade cuts like a dream. It is thinner behind the edge than the usual ffg Delica, believe it or not, and that...

Enuff 2 SE is one I am eyeing. Who here has a lot of time behind a SE fixed and what do you like and dislike?

Every week I see some really great pics on this forum so I thought we could have a weekly competition. The competition will last from Monday to Sunday and the winner and runner up will be announced on Sunday evening. The winner will be the judge for the...

I’ve been considering buying a BRK Bravo 1.25 or 1.5 for a while, partly for the size and partly for a convex grind off the shelf. The thing is I’d really prefer a Spyderco all things being equal, so was wondering if there has ever been (or plans to be) a...

basically, i want to be able to add a wise men signet ring to a salt 2 wharncliffe, but they aren't compatible because of how the salt handles are manufactured. that means i need handle scales that don't require liners to put the blade, lock, spring, and...

This is a continuation of RamZar's amazing lists! The bar was set Very high! Thanks RamZar!

*I welcome dialog, as long as it remains cordial, constructive and is conducted in a civilized manner. - Titanic: Blood & Steel

* Sources: New Reveal...

I just finished chopping up a bunch of strawberries with my S110V Military.

How about you? What was your Spydie's last chore?

I have a PM2 with aluminum scales that doesn’t have liners but want to put aftermarket scales on what can I do?