Spyderco Counterfeits, Clones, Replicas, etc. A place to list and reference all Spyderco counterfeits, clones, and replicas that are found. Anything that isn't a legitimate Spyderco fits in this area.
SE are the bees knees and you need to get with the program. Just as with PE knives, not all SE knives are created equally and different combinations perform better than others. Towards the end there's a bit of why I'm bothering with all this if...
I’d like to thank all of you for the great information on the issue mentioned. My primary purpose for the thread was more to raise awareness that it is a problem and hope that just the greater awareness would help contribute...
This forum has some of the most kindhearted people that I have ever met . So many of you are always willing to help someone in need. It is for that reason that I felt I had to post this.
Recently there was someone who posted about challenges they were...
There has been some discussion and fair amount of frustration on the question of Spyderco choosing not to ship internal parts. The subject is far more complicated than it might appear on the surface. Some of the questions that...
Just got my monthly email from tactical elements. They have some rare Spydies.
Two Spot neck knives, two vintage clip it Delicas, a gunting trainer, and a salsa with a collector # (why I didn't get it).
I wish Spyderco would send a YouTuber one of these to film a tutorial. Has it been a year since it came out? The method they describe in the manual seems designed to cut your off-hand when you switch sides, so I switch holding the knife between right and...
Post about your sharpenings. Brand, grit, abrasives, grit progression, desired edge finish, decision making in sharpening, whatever you want. Might be interesting to see what people use for certain tasks, and will give insight into the results of others'...
I noticed a little bit of rust underneath the scale on my H2 Dragonfly salt, so I decided to take it apart and see how bad it was. I saw that the back lock has several spots of rust on it. This knife hasn’t been exposed to any chemicals and it’s only been...
To kick off this thread, I'm going to use 10V from the rivers edge run on the pm2. I tested the more recent Para 3 and it matched the pm2 in terms of wear resistance. The 10V runs have been compared to the bento...
Every week I see some really great pics on this forum so I thought we could have a weekly competition. The competition will last from Monday to Sunday and the winner and runner up will be announced on Sunday evening. The winner will be the judge for the...
Curious to hear if anyone else is up for a Resilience in CPM-M4?
I'm up for at least a pair. The M4 Tenacious has a wonderfully thin grind behind-the-edge, and has been a joy to use, without having to modify. M4 is a killer steel, to boot, and surely...
What are the Spyderco CTS XHP knives? I recently pulled out my Bowie and so enjoyed using it. With all the new steels out there I kind forgot about it.
I read it likes a polish, going to try that.😀
I haven't been on this forum much for a while and very honestly it was because the S90V para 3 Lightweight had become my one and done knife. I had found my perfect edc knife so I didn't really feel as much need to learn and talk about knives.
I purchased the stretch XL H2 SE when DACK had it for $75 on a whim. I’m glad I did as I now understand what all the fuss is about with the SE and the model. There is a lot of blade for the handle size. I’m a plain edge kind of guy, but the SE blade seems...
I'm wondering how many people use a lanyard on a pocket knife. To me, it's a useless ugly hole that in many cases interferes with the position of the pocket clip so the knife cannot be deep carried. A lanyard is useful on a fixed blade for retention when...
So wanted to hear some input on this. I’ve been completely enamored with the Stretch XL since I first saw the prototype at the Blade show a few years ago. Wonderful design and IMHO a more refined design than any of the previous Stretches. I didn’t need...
I usually touch on this subject at least once a year. And we've gotten some really interesting results as to the models that folks would love to have in FULL SE. After all Spyderco really made their name and put themselves on the map by producing arguably...
Still, whenever I use my Chap FRN I wish there would be a longer version of it, or just any model in the Endela / Stretch size with both such a thin, slicey ffg blade (2mm) and such a thin handle and by that...
Although not earth shattering, a quick mod to my Yojimbo made it “just right:” not too light, not too heavy, not too grippy (pocket shredding) and not too slippy. I used it with both original scales and both Flytanium Copper scales, but this half and half...
Due to significant increases in material and operational costs, earlier this year, Spyderco found it necessary to make adjustments to all our pricing policies. As part of this restructuring, we will also...
I'm starting a new series of threads and I'm hoping that others will share my desires. The Title i.e. It's About Time For: indicates the desire for the return of certain past models that have gained cult status or consistent popularity as time has gone...
Sorry to be impatient, but are there any updates regarding the Bodacious?
I've never been so excited about a folder's release. I've carried a Military (S30V, S110V, and 52100) since 2005 or so, and I believe that the Bodacious will be replacing my...
Greetings, friends!There was another question about Civilian.What is the full angle in degrees of sharpening of this knife?Is the sharpening V-shaped or one-sided? I want to sharpen the knife to a mirror shine )I have a Tri-Angle with ceramic rods.I saw...
With the implementation of the Endela, the Endura family got a middle ground model sized between Endura and Delica (though as a matter of fact closer to the Endura than the Delica)
I think it would be great if in the (backlock) Salt line the gap between...
I’m confused by the Chinook line, have several questions. If you can answer any, grateful am I.
1) Why did this model have so many iterations - what was being changed or improved over time?
2) C1 seems to be sought after. Just rareity, or steel, or...
This will be my ongoing experiences with all 3 salts as my work steels...
Recently, there has been a lot of discussion involving the now 3 salt steels, and I've seen a lot of opinions of thoughts on them all. I just wanted to share my experiences of real...
I just received my Stretch 2 XL Salt serrated from GP Knives, and I'm loving it. I can't help but think that it would be a near perfect folding hunter. It has:
1) Excellent ergonomics for a secure, comfortable grip.
2) Grippy texturing, which also...
I have been looking around for a new flattening technique for my whetstones and I was hoping to pick the brains of anyone who has used any of the various methods I'm considering.
The first method is adhesive backed sandpaper on glass. I have used Wet or...
I’m sorry but in my opinion these prices are getting a little too high. Spyderco is one of the best and they have to make a profit. However when the Chinese s35 tenacious is going for $120 I think that’s a little much. In 2018 I bought my DLC PM2 for...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
