Spyderco Forums

Howdy guys.

I have a question for you. I am looking to get some replacement screws for a native 5 and a dragonfly 2. I was wondering if you guys knew what thread pitch, screw diameter, and screw length I would need to look for for each of these knives....

Delete

It's September 11... time to once again dust off the Spyderco World Trade Center Knife and clip it to my RFP.

We remember those who lost their lives on this day in 2001. We remember the heroes who gave their lives on this day in 2001 to save others....

Ultimate Steel™ TAIL END BONUS Countdown
Ultimate Steel™ ENDS September 30th
The Tail End Bonus Has Grown to OVER $30,000!
OVER $100,000 in Main Drawing Prizes!
DONATE TODAY and You Could WIN in 2 Drawings!

Just a Few of the OVER $30,000 in...

While the COVID-19 pandemic has interrupted almost all legislative efforts this year, Knife Rights continues its efforts to serve our knife community and Rewrite Knife Law in America™.

Knife Rights Foundation today announced the filing of an important...

Hi,

I'm not sure if anyone has already reported this, but I found a fake Techno 1 being peddled over at DHGate. Saw it yesterday (August 30). Also attaching the screenshot of the seller.

I've always been curious about this model, but I don't see much of a point in getting a part-serrated or plain edge for my uses, unfortunately. The G10 version would have been nice, but apparently it's discontinued and likely not making a return....

I need to confirm a hypothesis, can someone with both a matriarch 2 and a knifecenter endura find out if the matriarch's blade fits in the KC endura handle? I was thinking of doing some light mod work but I also know that the matriarch's tip rests...

Hey guys! New member here. I'm curious if anyone knows the amount of s30v techno 1's (oops techno) that were made, or even a close estimate. I know these were only made for a short period of time before going back to cts-xhp. Also if anyone knows the size...

With over $100,000 in prizes in the Ultimate Steel Main Drawing, we are launching the Tail End Bonus Drawing to offer all those who donate at the end of our fundraiser a second opportunity to win from some additional very spectacular prizes. We already...

BLADE Show 2020 is Cancelled
From the BLADE Show staff:

With the 39th annual BLADE Show scheduled for Aug. 7-9, we have been receiving countless questions from exhibitors and attendees about the impact of the coronavirus (COVID-19) on the show and its...

...

Hi, so I've got an old Spyderco Persian that I am not sure of the value. It's been used but still in good condition. The action is smooth, no lockback play, comes with the pocket clip and I believe it still has the factory edge. No rust. There are...

Another seller listing fake Spyderco shirts out of China.

As above, I am a U.K. based Spydernut, and just wondering if anyone has any recommendations on where to find particular older models?

Currently searching for a Mini Persian 1 or Kris. Knives on EBay is not a thing over here, and obviously the market is...

I bought my first Spyderco and did quite a bit of research before settling on the Manix 2 LW. It fell within my budget and had a locking mechanism that looked pretty ideal, and a blade size and shape that was what I was looking for, since my EDC is a tiny...

I finally got my SPY-DK. It tooK over Two months for USPS to get it to me.

It is a cool little knife, being longer in blade than the Urban but shorter than the UKPK. I really like that acutely sharp point.

Centering was perfect and it came very...

Any ETA on this?

I've been dreaming of adding this to my kitchen for quick touch ups. Can't wait!

Now, if only the 701mf could be brought back to life. But, that idea was quashed recently. Maybe, someday.

:spyder:

Can anyone direct me on where I can purchase a replacement pivot pin (female side) for the ambitious? Mine snapped while trying to center the blade. I've already contacted Spyderco and they are not willing to sell me the part. Really don't want to have to...

Knife Rights continues to Rewrite Knife law in America™: West Virginia Knife Law Preemption Takes Effect Today.

West Virginia SB 96 that expands the state's firearms preemption statute to include deadly weapons, including knives, goes into effect...

Double tap.

sal

If anyone knows, it will be someone on this forum. :)

What is the approximate value of a new in box Delica 4 FRN Orange Wharncliffe CPM S30V Cutlery Shoppe Exclusive? Here are a couple of links to the knife:

Thanks in advance.

TSINGA

I almost feel bad for buying these off ebay for the discount, but you have to remember that there are a bunch of Spydies out there for adoption. They need homes too!

I've dropped almost $700 on Spydercos the past 2 days lol.

Hi All,

Any chance we’ll see a teal ladybug? Wishing you all the best!

-GoldenVox

Not sure what happened to my first post regarding this but here it is again. I've had my para 3 for a while now and have been running it fine with the stock tip up carry position without issue. However, when attaching the clip in the tip down position I...

I've had my para 3 for a while now and have been running it the stock tip up carry position from the factory with no real issue. The problem lies in the fact that I want to run this knife tip down. I have tried on either side of the knife and run into two...

The past four months have been a roller coaster. While at SHOT Show in Las Vegas in late January, we were navigating record crowds. Upon returning home, concerns over the Wuhan Virus grew rapidly and soon every event on our crowded calendar was canceled...

I know some of you don't have access to FB but for those that do, what are your thoughts on this? Never heard of a sprint or exclusive run being counterfeited before. I don't think this one's a fake either but apparently others in that group disagree.

Hello, A few years ago I was given a Spyderco folding knife. I know nothing about the knife collecting world but just lately (while in Corona virus quarantine) I did some research on this knife and am thinking it is maybe something special. It is in mint...

Knife Rights has once again assembled an incredible array of prizes for this year's Ultimate Steel™ Spectacular including custom, limited edition and production knives, celebrity signed knives, firearms and more. Every prize has been generously donated,...

FYI, from Tactical Elements -- Available for Pre-order now...

($102.00)

Glow in the Dark Spyderco Delica C11FPGITD

Spyderco Delica GITD IS BACK IN STOCK due to arrive next week :)
This is the final run!
The GITD is really, really bright!...

:spyder: is there anybody else who owns a Spyderco Vesuvius with a gold spider mounted Into the Blue scale of the handle

Knife Rights’ Michigan Knife Law Preemption bill, HB 5286 , the “Michigan Knife Rights Act,” was passed by the House with a bipartisan vote of 71-36. It will now move to the Senate.

Thanks to all who used Knife Rights’ Legislative Action Center to...

Knife Rights’ Michigan Knife Law Preemption bill, HB 5286 , the Michigan Knife Rights Act, was passed out of the House Judiciary Committee with a bipartisan vote of 12-1. It will now be eligible for a vote by the full House.

If you are a Michigan...

Despite two years of hard work by all involved and numerous trips to Olympia by Knife Rights Director of Legislative Affairs Todd Rathner, including a last-minute “fire drill” this week to manage proposed floor amendments to the bill, the Washington State...

For anyone that like thier Federal HST ammo, Target Sports has a 50%off sale on the 50rd boxes of HST.
They even have .357 Sig in stock.
Now would would be the time to score some HST ammo :)

The Washington state “Spring Blade” (Switchblade) Knife Ban Repeal bill, SB 5782, was reported out the House Civil Rights & Judiciary Committee by a 12-3 vote with a “do pass” recommendation. Next step would be a vote by the full House. We will let...

Knife Rights’ Michigan Knife Law Preemption bill, HB 5286 , the “Michigan Knife Rights Act,” is scheduled for a hearing next Tuesday, March 3rd, at 9:00 AM in the House Judiciary Committee.

If you live, work or travel to Michigan please use Knife...

Are there replacement pivot screws available for the McBee?

I just got a new McBee and I noticed that one of the stippled pivot screws has a slightly stripped head.

The Washington Spring Blade Knife Ban Repeal bill, SB 5782 , which passed the Senate last year and ran out of time in the House, is back! Today it once again passed in the Senate by a vote of 46-1. This is the same overwhelming bipartisan vote as last...