Spyderco Forums

VWTattoo

I haven’t listened/ read back to all of the replies yet, but I have a few which might not have been listed, but to me they are as obscure as it gets. 1. C05 Standard/ Economy - actually, both are really nice lock backs, especially with the grippy G-10 version in ATS-55. Very similar to a Delica in s...

VWTattoo

My favorite Sprints are mostly older ones: (In no particular order) 1. ZDP laminate Burgundy Jess Horn and Calypso Jr. runs. They were/are just so superb, and they should still be in production. 2. C67 "R" Reissues with solid blades but skeletonized handles. Oh so rare, and I have both PE ...

VWTattoo

C05GS Standard in ATS-55 is riding pocket duty today. It's a tough little guy with great ergos that needs to be taken out for a day or two. I love the feel of the G-10 from this era of knives, there's just such grip.

VWTattoo

Oddly enough, mine did the exact same thing where the belt loop stitching let go. I called Spyderco yesterday about this, and will be sending it in for warranty repair/ replacement.

VWTattoo

Wartstein wrote: ↑
Mon Jan 17, 2022 8:25 am
/ So yours does also still have the hollow sabre grind?

Mine is an AUS-6 Version, from just before they switched to ATS-55. So yes, it does, and the AUS-6 is easy to touch up even in Serrated flavor.

VWTattoo

Definitely a small ultrasonic cleaner for home isn’t expensive, though an endura might be a tight fit, closed. I can also suggest a steam cleaner to blast steam in the pivot and heat up/ break up / blast away the crud you have going on in there. Both a small steam cleaner and an ultrasonic cleaner a...

VWTattoo

RustyIron wrote: ↑
Sun Dec 12, 2021 6:37 pm

Bolster wrote: ↑
Sun Dec 12, 2021 12:53 pm

Tangentially related... maybe you'll like it. Most people think of something completely different when you ask them if they want to see a picture of a 100" Hooker.
She’s really built, man… what a looker!

VWTattoo

https://bn1301files.storage.live.com/y4mSk-ld68NSHOntbRbnkyfp-RrPmWiu2mMlS2q1lGVtYdToXZ5pa9Nwe7CNqAsLhEsmEZrtIvzlYoseKsisB9smzEJhJGDLLWVDKOpx7UJoXTmaOCS9rrs9OJWO4qq7JJCiN2mnI1UEq2PfpLODG0jBtAO_KrZmlaMq4YQYumzzghMj8jM8Xq_4zP3ILE5_TKP?width=1008&height=567&cropmode=none Amalgam and Dragonfly ...

VWTattoo

https://bn1301files.storage.live.com/y4mRklTKCdv8ymToIPggaMNcTpIHony9Mwwv2ksYPIqNtXixjNnYj-2CE_wtkcHsS1-v3zm73Ztsn32apHaZjSUvrHcGeAqVewcCQyBGcxxMe_wY65MSbKAwknxr73iPJCTQxd1vIPiXM-2PPz7Kyub6wx07Pw-rX774xOtt2Z8x_6gexrBhRoExJ10pqcPcI-9?width=660&height=336&cropmode=none (Bad) Pic for your thre...

VWTattoo

https://bn1301files.storage.live.com/y4mRklTKCdv8ymToIPggaMNcTpIHony9Mwwv2ksYPIqNtXixjNnYj-2CE_wtkcHsS1-v3zm73Ztsn32apHaZjSUvrHcGeAqVewcCQyBGcxxMe_wY65MSbKAwknxr73iPJCTQxd1vIPiXM-2PPz7Kyub6wx07Pw-rX774xOtt2Z8x_6gexrBhRoExJ10pqcPcI-9?width=660&height=336&cropmode=none I love this knife- a fe...

VWTattoo

As the man who lost the MT01 and also lost out on the latest Mule, I can say a few things about how things went, and where I’m at. Was I frustrated with the website mishaps and errors while trying ( as a blind man) to get an order in on the site, which is so NOT friendly to navigate? Yes, sure. Do I...

VWTattoo

Thanks!

VWTattoo

I tried for over an hour, and when it finally was taking my payment, they ran out. Unbelievable. So much for replacing my shattered MT01...
Oh well, boo hoo! Whining complete.

VWTattoo

Nope, Out of Stock!

I tried for 1:20, no dice.

VWTattoo

The site is dead, totally frustrating.

VWTattoo

Bump, still no access yet.

VWTattoo

Hear hear on the in-house designs, JD. Among my favorites are the Dodo and Scorpius, as well as all of the Temp knives, fixed or folding. Plus, I still feel that ATS-34 is a great steel, maybe cause I'm stuck in the past somewhat... But, it still performs well and maintains a fine edge in my "p...

VWTattoo

The "SNAK!" lock up of my first generation C101 80mm Manix is ridiculous. Not discrete at all. It's obnoxious- I love it. The back lock leaves no room for error in lock engagement. It's probably the beefiest model I have, as it's gotten come custom Green G10 laid on top of the factory G10,...

VWTattoo

For me, today is the same as the last three weeks- Lil' Temp 3. It just feels right in so many ways, just like the original Lil' Temp 2 Rhino does- solid, grippy, and built like a tank, yet slices easily for such a thick blade stock. Also, the ergonomics are amazing! I love it, and I am still hopefu...

VWTattoo

I’m in for 1, I need it to replace the broken MT01 so I can finally use one in the kitchen.

Spyderco Forums

Search found 824 matches

Re: Completely Forgotten Spyderco Models: Your Favorites?

Re: Ranking Sprint Runs? Recent & Past models?

Re: What Spyderco is in your pocket today??

Re: Spyderco leather sheath Quality?

Re: Need help: Remedying gritty action on stainless steel Endura (no disassembly, no screws at all!)

Re: Need help: Remedying gritty action on stainless steel Endura (no disassembly, no screws at all!)

Re: Ho hum... non-Magnacut Mule

Re: What Spyderco is in your pocket today??

Re: I just bought a Starmate in 440v - what should I expect?

Starmate PE Day

Re: Mule team - preorder

Re: Spyderco Swap!

Re: Not fun

Re: MT35P - CPM MagnaCut Mule Team - Release Date

Re: MT35P - CPM MagnaCut Mule Team - Release Date

Re: Spyderco Swap!

Re: Spyderco's ATS-34 Era: Considered Premium At That Time

Re: What's your favorite model to OPEN?

Re: What Spyderco is in your pocket today??

Re: MT35P - CPM MagnaCut Mule Team - Release Date